Inkjet clear water transfer paper A4

Inkjet clear water transfer paper A4

Inkjet water-slide decal paper using your inkjet printer.first soak your decal in water and remove the backing, then apply the water slip adhesive side of your decal to your surface.This water slide decal paper is perfect for any project such as Ceramics,Glass, Jade, Metal and Plastics etc.

Specifications

specifications:

Item  inkjet clear water transfer paper )
Weight  200g
Size  A4 A3 
Ink Pigment & Dye ink
Printer Inkjet printers
Application

Cups,plates,flowers,crystal,ceramics,metal,shell,jade,plastic,wood etc

 

Features:

Unleash your creativity- This water slide paper is perfect for any project, personal or commercial. It can be used on Ceramics,Glass, Jade, Metal and Plastics

highest quality- Our Waterslide decal paper is the highest quality in the market. With an excellent ink capacity, our paper produces a premium printing quality of up to 5760 pdi. No fading and excellent color presentation.

Inkjet and clear- This paper works only for inkjet printers and for clear or light surface.

Prefect gifts - Make personalized gift. You cant print photos and transfer them to coffee mugs and give them as gifts!

 

Attentions:

Inkjet and clear- This paper works only for inkjet printers and for clear or light surface.

 

 

How to use:

Water Transfer Paper for Inkjet Printer.

Step 1: Choose one picture you design by yourself and print it ( inkjet printer can be used directly) .

Step 2: Use a hair drier to dry it or natural air dry(5 minutes).

Step 3: Using the transparent gloss paint to spray evenly in the pattern surface.(you can get transparent gloss paint in the paint shop) .

Step 4: Dry it and cut it,Then,put it into the water. After 30-60s, remove the transfer membrame 0.5cm first from the base paper.

Step 5: Put the 0.5cm picture first onto the surface then pull the base paper away slowly.

Step 6: Clean the bubble under the transfer membrame with a brush. use soft cloth or absorbent paper to scrape the surface.

Step 7:If time is limited you can use a oven to dry it 10-15 minutes with 100°C. If the material is plastic, 50-70°C is all right. If time is enough, hair drier also can be OK.

 


You might also like